Garmin DTC300 manual Printer Components Dye-Sublimation Print Ribbons, Step Procedure

RESTRICTED USE ONLY Fargo Electronics, Inc.

Printer Components: Dye-Sublimation Print Ribbons

Note that the Printer requires both specialized and authorized print Ribbons in order to print and function properly.

Step	Procedure
1	Do not run the cards with a contaminated, dull, or uneven surface through the
	Printer.
	Caution: Printing onto such cards will ultimately lead to poor print
	quality and will greatly reduce the life of the Printhead.
2	Always store the card stock in its original packaging or in a clean, dust-free
	container.
3	Do not print onto cards that have been dropped or soiled. (Note: Printhead
	damage caused by contaminated or poor quality cards will automatically void the
	Printhead's factory warranty.)
4	If printing onto cards with a pre-punched slot, do not print over the area of the
	card with the punched slot. (Note: To avoid this area when printing, use the
	options in the Overlay / Print Area tab to omit printing in this area, or punch the
	slot after the card has printed.)

Here is the table for Dye-Sublimation-Only Print Ribbon and Dye-Sublimation Black (BO) (provides 500 prints).

Type	Description
Dye-	It is available in a monochrome version. This Ribbon consists of dye-
Sublimation-	sublimation Ribbon panels which alternate with a clear protective Overlay
Only Print	(O) Panel. Dye-Sublimation images must have an overlay panel applied
Ribbon	to them or they will quickly begin to wear or fade.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 2-12