Garmin DTC300 manual Review the following information, LCD Error Display Ribbon Rfid Error

RESTRICTED USE ONLY Fargo Electronics, Inc.

Resolving a Ribbon RFID Error (Ribbon RFID Sensor is Corrupted)

All Troubleshooting procedures assume that only factory-authorized supplies are in use in the Printer.

Step	Procedure
1	Review the following information.
	•	Symptom: Printer RFID Sensor does not detect a recognizable signal from
		the Ribbon.
	•	Printer Error State: The Ribbon tag information is corrupted or incorrect.
	•	LCD Error Display: Ribbon RFID Error
	•	Driver Monitor Error Display: Ribbon RFID Error
2	Replace the Print Ribbon RFID Sensor.
	a.	Replace the Print Ribbon RFID Sensor.
	b.	Press on the Resume button.
	c.	If the error continues, replace the Printer Main Board.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-13