Garmin DTC300 manual Using the Printer Calibration Utility

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Printer Calibration Utility

Access the Settings dialog box via the Settings button on the Calibrate tab. Use the adjustment mode to change the Printer's internal settings. (Note: The Card Printer is equipped with an internal adjustment mode programmable through the Settings dialog box. This dialog box is accessible only if the Printer is powered ON, it is in Ready Mode and it is properly connected to the PC.)

Caution! These settings are optimized at the factory. In most cases, these settings can be used without changing them.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 5-87