Garmin DTC300 manual Resolving a No Ribbon Installed Error

RESTRICTED USE ONLYFargo Electronics, Inc.

Resolving a No Ribbon Installed Error (continued)

Step	Procedure
2	Verify that a Ribbon Cartridge is installed in the Printer.
	a.	Press on the Resume button.
	If the issue persist, continue to Step 3.
3	Remove the rear cover and check that the Ribbon RFID cable is securely
	connected to the Main Board (J-5) and the RFID Sensor.
	•	If the connections are loose, reattach
	•	. Press on the Resume button.
	•	If the connections are good or if the issue persists, continue to Step 4.
4	Replace the Ribbon RFID Sensor.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-25