Garmin DTC300 manual Printer Setup and Installation, Choosing a Good Location

RESTRICTED USE ONLY Fargo Electronics, Inc.

Printer Setup and Installation

Choosing A Good Location

Follow these guidelines:

•Place the unit in a location with adequate air circulation to prevent internal heat build up.

•Use the Printer's dimensions as a guideline for the minimum clearances to the unit.

(Note: Allow for adequate clearance in front of the unit to accommodate the unit with its Covers open.)

•Do not install unit (a) near heat sources such as radiators or air ducts, or (b) in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

About Moisture Condensation

If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside the unit. Should this occur, print quality may not be optimum.

Leave the unit turned OFF in a warm, dry room for several hours before using. This will allow the moisture to evaporate.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 3-3