Garmin DTC300 manual Step

RESTRICTED USE ONLY Fargo Electronics, Inc.

Resolving a Card Not Fed Error (Two (2) or more card feed at the same time)

All Troubleshooting procedures assume that only factory-authorized supplies are in use in the Printer.

Step Procedure

1Review the following information.

•Symptoms: Two or more cards feed at the same time causing the cards to jam at the Card Hopper Roller. Printer is out of cards.

•Printer Error State: Card is not being detected by card TOF Sensor 11 sec after the initiation of a print job causing the Printer to produce an error

•LCD Error Display: Card Not Fed

•Driver Monitor Error Display: Unable to Feed Card

Continued on the next page

I

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-9