Garmin DTC300 manual Selecting the Mechanics tab in the Diagnostics Utility

RESTRICTED USE ONLY Fargo Electronics, Inc.

Selecting the Mechanics tab in the Diagnostics Utility

Step Procedure

1a. Select the Mechanics tab to test Motors and Sensors in the Printer. (Note: This section has a procedure for each function by a Run button, as shown below.)

b.See the entire Selecting the Mechanics tab in the Diagnostics Utility section for related sub-procedures (Steps 2A to 2G).

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 10-13