Garmin DTC300 manual Selecting the Defined Areas function

RESTRICTED USE ONLY Fargo Electronics, Inc.

Selecting the Defined Area(s) function

To define an area, refer to the following steps:

Step Procedure

1Click on the Defined Area(s) check box. (Note: This will activate the card grid in the upper half of the window. It is through this card grid that up to five areas can be defined.)

When the card grid is first activated, a small square will appear at its default size of .2" x .2" / 5mm x 5mm and at its default location in the lower left-hand corner (0,0). This square represents the first defined area.

(Note: Changing the orientation of the card in the Card Tab will change the appearance of this Tab.)

Continued on the next page

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 5-76