Garmin DTC300 Printer Components Front Cover, Components Description, Cancel button, Pause button

RESTRICTED USE ONLYFargo Electronics, Inc.

Printer Components: Front Cover

Components	Description
Front Cover	Opens to allow access to the Ribbon Cartridge. (Note: This cover must
	be closed in order for the Printer to begin printing.)
Printhead	The component of the Printer that actually does the printing. (Note: This
	component is fragile and must not be bumped or touched with anything
	other than a cleaning swab.)
Cancel button	The Cancel button turns the Printer ON and OFF. (Note: It also
	serves to cancel the current print job and reset the Printer for the next
	print job.)
	If a card is left within the Printer after a print job is canceled, it will
	automatically be ejected when the Printer is turned back ON.
Pause button	The Pause button is used to pause the Printer during normal operation
	and also to resume operation after an error condition is cleared. (Note:
	In general, as the icon above this button indicates, errors are related to
	either the Ribbon or the cards. If an error occurs, the Pause LED will
	flash.)
Card	Automatically cleans cards for higher print quality. (Note: Clean the
Cleaning	Card Cleaning Roller during every Ribbon change (every 250 cards) or
Roller	as needed.)
Card Input	Load blank cards into this Hopper.
Hopper
Power Port	Connect to the included power cord.
USB Port	Connect to a Windows PC with a USB cable.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 2-9