16
Control Lock
Function
The control lock function disables all the buttons on the
front panel except the u (power) and OPTION buttons and
the INPUT switch.
1Press the OPTION button.
The “OPTION” OSD appears.
2Press the ¨./> button to select “LOCK.”
3Press the >?// button to select “LOCK.”
The “OPTION” OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
Once you select “LOCK,” you cannot select other item on
the “OPTION” OSD using the ¨ ./> button.
If you press any button other than the u (power) and
OPTION buttons and the INPUT switch, the mark
appears on the screen.

To cancel the control lock

Press the > ?// button to select “UNLOCK.”
Note
Use the control lock function only when necessary.
OPTION
OPT ION
LANGUAGE
OSD POSI TI ON:
OSD MENU
LOCK
INPUT : BNC
JPN ENG FRA
DEU ESP IT A
RIGHT BOTTOM
NORMAL EXPERT
UNLOCK LOCK
84.4
kHz/ 72Hz
SELECT SET
Degaussing theScreen
The screen of the monitor is automatically degaussed when
the power is turned on (page 3).
You can degauss manually.
1Press the SCREEN button.
The “SCREEN” OSD appears.
2Press the ¨ ./> button to select “DEGAUSS.”
3Press the > / button.
The screen is degaussed for about five seconds.
SCREEN
08
SCREEN
H CONVERGENCE
CANCEL MO IRE
MOIRE ADJ
LANDING
85
OFF ON
SELECT SET / ADJUS T
V CONVERGENCE 72
0
ADJUST
DEGAUSS ON