Sony GDM-W900 operating instructions Control Lock Function

Control Lock

Function

The control lock function disables all the buttons on the front panel except the u (power) and OPTION buttons and the INPUT switch.

1Press the OPTION button.

The “OPTION” OSD appears.

OPTION	OPT I ON
	L ANGUAGE	JPN	ENG FRA
		DEU	ESP	I TA
	OSD POS I T I ON : R I GHT			BOTTOM
	OSD MENU	NORMAL		EXPERT
	LOCK	UNLOCK		LOCK
	I NPUT : BNC	84.4kHz/ 72Hz
	SELECT		SET

2Press the ¬./>button to select “LOCK.”

3Press the >?//button to select “LOCK.”

The “OPTION” OSD automatically disappears after about 30 seconds. To turn off the OSD, press the OPTION button again.

Once you select “LOCK,” you cannot select other item on the “OPTION” OSD using the ¬ ./>button.

If you press any button other than the u (power) and

OPTION buttons and the INPUT switch, the mark appears on the screen.

To cancel the control lock

Press the > ?//button to select “UNLOCK.”

Note

Use the control lock function only when necessary.

Degaussing the Screen

The screen of the monitor is automatically degaussed when the power is turned on (page 3).

You can degauss manually.

1Press the SCREEN button.

The “SCREEN” OSD appears.

0	8
SCREEN		SCREEN
		H CONVERGENCE			85
		V CONVERGENCE			7 2
		CANCEL	MO I RE	OFF ON
		MO I RE	ADJ		0
		LAND I NG		ADJUST
		DEGAUSS		ON
		SELECT		SET / ADJUST

2Press the ¬ ./>button to select “DEGAUSS.”

3Press the > /button.

The screen is degaussed for about five seconds.

16