Connections
Before using this monitor, check that the following items are included in your package:
•Monitor (1)
•Video signal cable (1)
•Power cord (1)
•Macintosh 1) adapter (1)
•HD15 (Female)
•Warranty card (1)
•This operating instructions (1)
Connecting to the 5 BNC’s connector
to VIDEO IN R/G/B | to SYNC IN HD/VD |
This monitor will sync with any IBM or compatible system equipped with VGA 2) or greater graphics capability. Although this monitor will sync with other platforms, a cable adapter is required. Please consult your dealer for advice on which adapter is suitable for your needs.
Step 1: Connect the monitor to the computer.
With the computer switched off, connect the video signal cable to the monitor (HD15/5 BNC’s) and connect the other end to the video output.
To connect the HD15 connector, use the supplied video signal cable.
To connect the 5 BNC’s connector, use the
Note
Video signal cable SMF- 400 (not supplied)
Connect to the computer in the same way as for the HD15 connector.
For the customers using IBM PC or IBM compatible system which is not compatible with DDC2AB and DDC2B+
This monitor uses a No. 9 pin in the video signal connector for DDC2AB and DDC2B+ compatibility.
Some PC systems which are not compatible with either DDC2AB or DDC2B+ may not accept the No. 9 pin. If you are not sure whether your PC system accepts the No. 9 pin or not, use the HD15 (Female)
-HD15 (Male without the No. 9 pin) adapter (supplied). Make sure that the male side (without the No. 9 pin) is connected to the computer.
Do not touch the pins of the video signal cable.
Connecting to the HD15 connector
For the customers using the Macintosh computer
Supplied Macintosh adapter is compatible with Macintosh LC, Performa, Quadra and Power macintosh series computers. Macintosh II series and some older version of PowerBook models may need an adapter with micro switches.
Step 2: Connect the power cord.
With the monitor switched off, connect the power cord to the monitor and the other end to the power outlet.
IBM or compatible computer
to HD15
to a wall outlet
to video output | Power cord (supplied) |
Video signal |
cable |
(supplied) |
(supplied) *
Macintosh computer
to video output
Macintosh adapter (supplied)
* The
The installation of your monitor is complete. Enjoy your monitor.
Notice
To comply with the limits of FCC class B and IC Class B for digital device, please attach supplied video signal cable for HD15 input or
1)Macintosh and Power Macintosh are trademarks of Apple Computer Inc.
2)VGA is a trademark of IBM Corporation.
4
