13
EN
F
D
ES
I
J
Adjusting the picture
brightness and contrast
The adjustment data becomes the common setting for all
input signals received.
1Press the ¨./> button or the >?// button.
The “BRIGHTNESS/CONTRAST” OSD appears.
2Press the ¨./> button to select “PRESET” and the
> ?// button to select a preset number.
When you want to use the monitor later in the same
condition, just select the same preset number.
3Press the ¨./> button or the >?// button to
adjust the brightness or contrast.
¨ BRIGHTNESS:
Adjusts the picture brightness.
> CONTRAST:
Adjusts the picture contrast.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the ¨./> or >?// button
again.
To reset, press the RESET button while the OSD is on. The
selected preset number is reset.
Adjustments (Expert mode)OPTION
You can adjust more in detail in the expert mode than in the
normal mode.
Before adjusting
• Connect the monitor and the computer, turn them on and
feed the signal to the monitor.
• Select “LANGUAGE” in the “OPTION” OSD, then select
“ENG” (English) on page 8.
Selecting the expert mode
1Press the OPTION button.
The “OPTION” OSD appears.
2Press the ¨./> button to select “OSD MENU.”
The “OSD MENU” turns yellow.
3Press the >?// button to select “EXPERT.”
Move the green p to EXPERT.
EXPERT appears at the top right corner of the OSD in
Expert mode.
The “OPTION” OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
OPT ION
LANGUAGE
OSD POSI TI ON:
OSD MENU
LOCK
INPUT : BNC
JPN ENG FRA
DEU ESP IT A
RIGHT BOTTOM
NORMAL EXPERT
UNLOCK LOCK
84.4
kHz/ 72Hz
SELECT SET
OPT ION
LANGUAGE
OSD POSI TI ON:
OSD MENU
LOCK
JPN ENG FRA
DEU ESP ITA
RIGHT BOTTOM
NORMAL EXPERT
UNLOCK LOCK
SELECT SET
INPUT : BNC
84.4
kHz/ 72Hz
BRI GHTNESS / CONTRAST
1
10
EXPERT
23
BRI GHTNESS
SELECT SET / ADJUS T
PRESET 23
CONTRAST
OPT I ON
LANGUAGE
OSD POS IT ION:
LOCK
RIGHT
SELECT SET / ADJUS T
ENGJPN FRA
ESP ITADEU BOTTOM
OSD MENU NORMAL EXPERT
LOCKUNLOCK
INPUT : BNC
84.4
kHz/ 72Hz
EXPERT