Adjustments (Normal mode)
Adjusting the color
temperature
The adjustment data becomes the common setting for all input signals received.
1Press the COLOR button.
The “COLOR” OSD appears.
COLOR
COLOR
COLOR TEMPERATURE
50 00K | 6500K | 9300K | |
VAR I ABLE |
|
| |
|
|
|
|
SELECT | SET / ADJUST | ||
Resetting the picture size, position, moire, and geometry* at the same time
When there is no OSD displayed, press and hold the RESET button for one second.
The above items of the current input signal are reset to
* The ”Rotation” adjustment (pages 10, 14) is not reset.
2Press the >?//buttons to select a color temperature.
The factory settings are: 5000K, 6500K, 9300K
Adjusting the color temperature
Press the ¬./>button to select “VARIABLE,” and adjust by pressing the >?//button.
The figure of the adjusted color temperature changes.
The OSD automatically disappears after about 30 seconds. To turn off the OSD, press the COLOR button again.
To reset, press the RESET button while the OSD is on. The selected color tempetarure is reset. The adjustments you made in the expert mode (page 15) are also reset.
Resetting to the factory-
preset levels
1Press the button of the OSD you want to reset to the factory setting.
2When the parameters are arranged in vertical row in
the OSD, select a parameter you want to reset by pressing the ¬./>buttons.
3Press the RESET button.
RESET
Resetting all adjustment data
When there is no OSD displayed, press and hold the RESET button for more than two seconds.
All adjustment data including the brightness and contrast are reset to
12
