10
2For vertical adjustment
Press the ¨ ./> buttons.
. . . . to decrease
> . . . to increase
For horizontal adjustment
Press the > ?// buttons.
? . . . to decrease
/ . . . to increase
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the SIZE button again.
To reset, press the RESET button while the OSD is on. The
horizontal and vertical sizes are both reset.
Adjusting the picture rotation
The adjustment data becomes the common setting for all
input signals received.
1Press the GEOM button.
The “GEOMETRY” OSD appears.
2Press the ¨./> buttons.
. . . . to rotate counterclockwise
> . . . to rotate clockwise
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the GEOM button again.
To reset, press the RESET button while the OSD is on. The
picture rotation and the pincushion settings are both reset.
Adjusting the picture
centering
The adjustment data becomes the individual setting for each
input signal received.
1Press the CENT button.
The “CENTER” OSD appears.
2For vertical adjustment
Press the ¨ ./> buttons.
. . . . to move down
> . . . to move up
For horizontal adjustment
Press the > ?// buttons.
? . . . to move left
/ . . . to move right
The OSD automatically disappears after about 10 seconds.
To turn off the OSD, press the CENT button again.
To reset, press the RESET button while the OSD is on. The
horizontal and vertical centerings are both reset.
Adjusting the picture size
The adjustment data becomes the individual setting for each
input signal received.
1Press the SIZE button.
The “SIZE” OSD appears.
Adjustments (Normal mode)
CENT
23 10
CENTER
23 10
SIZE

i

SIZE
GEOM
GEOMETRY
23 10