Panasonic SC-AK350 Sound adjustment, Timer, Using the sleep timer, Selecting sound effects

Timer (continued)

	To activate the timer
	5		Press and hold [– ˚PLAY/REC] to turn on your desired
ENGLISH	6		timer.
			Press [y] to turn off the unit.
						˚ PLAY		➞	˚ REC
							no display (off)
			The unit must be off for the timers to operate.
	Other basic operations
		To			Action
		change the			Repeat steps 1 to 4 and 6 (\ see page 13 and
		settings			above).
		change the			1) Press and hold [– ˚PLAY/REC] to clear the
		source or				timer indicator from the display.
DANSK		volume			2) Make changes to the source or volume.
					3) Perform steps 5 to 6 (\ see above).
		check the			Press [CLOCK/TIMER] repeatedly to select
		settings			˚PLAY or ˚REC.
		cancel			Press and hold [– ˚PLAY/REC] to clear the
					timer indicators from the display.
	If you use the unit after the timers are set
	After using, check that the correct tape/disc are loaded
	before turning the unit off.
	Note:
	• The play timer will start at the preset time with volume increasing
FRANÇAIS		gradually to preset level.
	• The record timer will start 30 seconds before the set time with the
		volume muted.
	• The timer comes on at the set time everyday if the timer is on.
	• The unit must be in the standby mode for the timer to function.
	• If you turn the unit off and on again while a timer is functioning,
		the fi nish time setting will not be activated.
	• If MUSIC PORT is selected as the source when the timer comes
		on, the system turns on and engages MUSIC PORT as the
		source. If you wish to playback or record from the portable audio
		equipment, just activate the equipment’s play mode and increase
		the volume. (See the portable audio equipment’s instruction
		manual.)
				Using the sleep timer
- 4
	This function enables you to turn off the unit automatically
LANG
	after the set time.
	Press [SLEEP] to select your desired time.
				SLEEP 30			SLEEP 60			SLEEP 90
					SLEEP OFF			SLEEP 120

		Sleep timer indicator
5		To cancel
		Press [SLEEP] to select “SLEEP OFF”.
-
LANG		Changing the remaining time
		Press [SLEEP] to show the remaining time and press
		[SLEEP] again to select your desired time.
		Note:
		• The play and sleep timer or the record and sleep timer can be
		used together.
	RQTV0199	• The sleep timer always has priority. Be sure not to overlap timer
		settings.
		• The sleep timer turns off when you perform the record function.

14

Sound adjustment

Selecting sound effects

Preset EQ

Press [PRESET EQ] repeatedly to select your desired setting.

HEAVY ➞ SOFT ➞ CLEAR ➞ VOCAL ➞ DISCO

			FLAT (off) ➞			HALL	➞	LIVE
	Setting			Effect
	HEAVY			Adds punch to rock
	SOFT			For background music
	CLEAR			Clarifi es higher frequencies
	VOCAL			Adds gloss to vocal
	DISCO			Produces sound with the same kind of lengthy
				reverberations heard at a disco
	LIVE			Makes vocals more alive
	HALL			Adds an expansiveness to the sound to produce
				the atmosphere of a great concert hall
	FLAT			No effect
		MANUAL
			Manual EQ
1		Press [MANUAL EQ] repeatedly to select your desired
		setting.
					BASS ➞ MID		➞ TREBLE
	Setting			Effect
	BASS			For lower pitch sound
	MID			For middle pitch sound
	TREBLE			For higher pitch sound
2		Press [4, / REW ] or [¢,					/ FF] to adjust the
		level.

OR

Press [+] or [–] on the main unit to adjust the level.

Note:

•The level of the pitch is between -3 to +3.

•The changes you make are stored and automatically recalled the next time you select “MANUAL EQ”.

•By main unit only AK450

Press and hold [MANUAL EQ] to turn on or off the LED fl ashing.

HARD	Enhancing the bass sound
BASS

You can enhance low-frequency sound so that heavy bass sound can be heard clearly, even if the acoustics of your room are not optimal.

To activate

Press [HARD BASS].

To cancel

Press [HARD BASS] again.

Note:

The actual effect depends on the disc.

RQT8043