Panasonic SC-AK250, SC-AK450, SC-AK350 important safety instructions Microphone mixing, Timer

Microphone mixing

The buttons described for “Microphone mixing” are mainly for the main unit unless indicated otherwise.

Enjoying the microphone mixing

You can enjoy microphone mixing from various music sources (cassette, disc, radio or other external equipments).

1	Firstly, lower the volume with [MIC VOL], connect
	the microphone.
	Plug type : Ø 3.5 mm monaural
2	Start playing the music source.
3	Adjust the volume with [VOLUME + ] or [VOLUME − ]
	and [MIC VOL] and sing along.

Note:

•If a strange noise (howling) is emitted during use, move the microphone away from the speakers, or turn down the microphone volume.

•When you are not using the microphone, disconnect it from the microphone jack, and turn down the microphone volume level to “MIN”.

•Sound adjustments can be made using microphone mixing but recording will not be affected.

			Record microphone mixing
1	Press [0, OPEN] and insert the cassette to be
	recorded.
	Insert with the side to be recorded facing towards you
	and the exposed tape facing down.
2	Lower the volume with [MIC VOL], then connect the
	microphone.
3	Select the music source:
		When singing Insert the desired disc (\ page 8).
		along with
		discs
		When singing Select your desired station (\ page 12).
		along with
		radio
		When singing		Connect and prepare the external
		along from		equipment (\ page 15)
		other external
		equipments
4
	Press [¶, REC] and start microphone mixing.

		To record your voice
1	Press [0, OPEN] and insert the cassette to be
	recorded.
2	Lower the volume with [MIC VOL], then connect the
	microphone.
3	Press [¶, REC] to start recording.
4	Speak through the microphone and adjust the
	volume with [VOLUME + ] or [VOLUME − ] and

[MIC VOL].

Timer

			Setting the clock
									ENGLISH
				CLOCK		˚ PLAY		˚ REC
This is a 24-hour clock.
1	Press [CLOCK / TIMER] to select “CLOCK”.
	Each time you press the button:
2					Original display
	(					)
		Within 8 seconds or so
	Press [4, / REW] or [¢,						/ FF] to set the time.
3	Press [CLOCK / TIMER] to finish setting the time.
Displaying the clock
Press [CLOCK / TIMER] once when the unit is on or in standby
mode.									DANSK
The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the play or record timer

You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or the external equipment (record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

Timer

Action

FRANÇAIS

Play timer

Prepare the music source you want to listen to;

cassette, disc number (1~5), radio or other external

equipments, and set the volume.

Record

Check the cassette’s erasure prevention tabs

timer

(\ page 11), insert the cassette and tune to the

radio station (\ page 12) or select the external

equipment (\ page 15).

1

Press [CLOCK/TIMER] to select the timer function.

Each time you press the button:

CLOCK ➞ ˚ PLAY

➞ ˚ REC

4

Original display

-

˚PLAY : to set the play timer

LANG

˚REC

: to set the record timer

(Proceed to the next step

within 8 seconds

)

2

Press [4, / REW ] or [¢,

/ FF] to set the

starting time.

Start time

1

Play timer indicator

Record timer indicator

3

Press [CLOCK / TIMER] to confirm.

- 5

4

Repeat steps 2 to 3 to set the finishing time.

LANG

Finish time

1

RQTV0199

13

RQT8043