Other functions
Listening to an external source | Using the sleep timer |
You can listen to other audio component(s) connected to | Use this function to program the system to turn off |
this system through your new speaker system. | automatically after a specified amount of time. |
SOURCE | VOLUME +/- |
To operate the audio component which is connected to this system, press the SOURCE button repeatedly until “AUX” appears on the front panel display.
Adjust the volume level by pressing the VOLUME + or VOLUME - buttons.
Note: This system has a built in Dolby Pro Logic decoder, so you can enjoy the live sound in Dolby Surround with all speaks operating.
SLEEP
Press the SLEEP button repeatedly, to select the following the time intervals in minutes: 10 Ö 20 Ö 30 Ö 40 Ö 50 Ö 60 Ö 70 Ö 80 Ö 90 Ö 100 Ö 110 Ö 120 Ö 00 (off).
ξ When you have selected the specified time, the “SLEEP” indicator lights on the television screen and front panel display.
ξ To reset the time, press the SLEEP button again to make another selection.
ξ To check the remaining time before the system turns off, press the SLEEP button. The remaining time will be displayed on the television screen and front panel for a few seconds.
ξ To cancel the sleep function, press the SLEEP button until it reaches 00 (off).
29
