Setup menus
USER menu | <TAPE PROTECT> |
| ||
|
| |||
|
| Item |
| Setting |
| No. | Superimposed | No. | Superimposed |
|
| display |
| display |
| 400 | STILL | 0000 | 0.5s |
|
| TIMER | 0001 | 5s |
|
|
| 0002 | 10s |
|
|
| 0003 | 20s |
|
|
| 0004 | 30s |
|
|
| 0005 | 40s |
|
|
| 0006 | 50s |
|
|
| 0007 | 1 min |
|
|
| 0008 | 2min |
| 401 | SRC | 0000 | STEP |
|
| PROTECT | 0001 | HALF |
Description
This selects the time to be taken until the unit goes into the tape protection mode when it is left standing in the stop or search still (JOG/VAR/SHTL) mode. (Unit: s = second, min = minute)
<Note>
With the DV format, the maximum time which can be set is 10s even when a setting above 10s has been selected. The selection screen, however, will operate for up to 2 minutes.
This selects the operation during the tape protection mode when the unit is left standing in the still status during the search mode (JOG/VAR/SHTL).
0:STEP FWD.
1:HALF LOADING.
<Note>
When STEP FWD is selected, the unit automatically goes into the HALF LOADING mode when the total time for which the unit is left standing in the still status reaches 30 minutes (DVCPRO) or 1 minute (DV).
The underline on the setting item denotes the initial setting.
<Note>
In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be set for automatic tape protection mode in 30 seconds or under.
- 5 1 -
