Controls and their functions (continued)

<Connector area>

ANALOG COMPONENT VIDEO OUT connector

The analog component video signal is output from this connector.

ANALOG COMPOSITE VIDEO OUT connectors

The analog composite video signals are output from these connectors.

The video signal with signals superimposed on it can be output from the VIDEO OUT3 connector.

The superimpose function can be set ON or OFF on the setup menu No. 006 (SUPER).

DIGITAL AUDIO IN/OUT connector

This I/O connector is for digital audio signals which comply with the AES/EBU standard.

SERIAL DIGITAL COMPONENT AUDIO/VIDEO IN/OUT connector (optional AJ-YA750P interface board required)

This I/O connector is for digital component audio and video signals which comply with the SMPTE 259M-C/272M standard.

Remote control connectors

The unit can be controlled from an external source by connecting the unit with another unit or an external controller.

There are two remote control connectors, one for IN/OUT uses and the other for OUT uses.

IN/OUT: For connection with an external controller. For connection with deck-to-deck operation.

OUT: For connection with parallel running operations. For use in a loop-through configuration.

ENCODER REMOTE connector

The external encoder/controller is hooked up to this connector when the video output signal and other settings are to be adjusted from an external source.

RS-232C connector

PARALLEL REMOTE connector

This is used when operating the unit from an external source.

- 1 8 -

Page 18
Image 18
Panasonic AJ-D750P Analog Component Video OUT connector, Analog Composite Video OUT connectors, Remote control connectors