Panasonic AJ-D750P manual Specifications, Other input/output connector

Specifications

GENERAL

Power	supply:			AC 120 V±10%, 50 – 60 Hz
Power consumption:				165 W
Operating	ambient	temperature:		41°F to 104°F (5°C to 40°C)
Operating	ambient	humidity:		10% to 90% (no condensation)
Weight:				39.6 Ibs (18 kg)
Dimensions (WxHxD):				16-3/4×6-15/16×16-3/8 inches
Recording	format:			DVCPRO format
Recording	tracks:			Digital video
				Time code	Recorded in sub-code area
				Digital audio 2channels
				Cue Track	1 track
Tape speed:				Control (CTL) 1 track
				33.820 mm/sec
Recording	time:			General purpose
				cassette; Max. 123 minutes
				News-gathering
Tape:				cassette; Max. 63 minutes
				1/4-inch thin magnetic layer metal tape
FF/REW time:				Less than 3 min (with general purpose
				cassette)
				Less than 2 min (with news-gathering
Editing accuracy:				cassette)
				±0 frame (using time code)
Tape timer accuracy:				±1 frame (using continuous CTL signal)
Servo lock time:				Less than 0.5 sec. (color framing/
				standby ON)
VIDEO
(Digital video)
Sampling frequencies:				Y: 13.5 MHz/PB, PR: 3.375 MHz
Quantizing:				8 bits
Error correction:				Reed-Solomon product code
(Digital IN/analog component OUT)
Video bandwidth:				Y: 30 Hz to 5.5 MHz (±0.5 dB)
				5.75 MHz (–2 dB)
				PB, PR: 30 Hz to 1.3 MHz (±0.5 dB)
S/N ratio:				1.5 MHz (–5 dB) typ.
				Better than 60 dB
K factor:				Less than 1%
(Analog	component		IN/component OUT)
Video bandwidth:				Y: 30 Hz to 5.5 MHz (±1 dB)
				5.75 MHz (–3 dB)
				PB, PR: 30 Hz to 1.3 MHz (±1 dB)
S/N ratio:				1.5 MHz (–6 dB) typ.
				Better than 55 dB
K factor:				Less than 1%
(Analog	composite		IN/composite OUT)
Video bandwidth:				Y: 0 to 4.5 MHz (±1 dB)
S/N ratio:				Better than 20 ns
K factor:				Less than 2%
(Video input connector)
Analog component input:				BNC×3 (Y, PB, PR)
				Y: 1.0 Vp-p, 75
				PB, PR: 0.486/0.7 Vp-p switchable, 75
Analog composite input:				(75% color bar, 7.5% setup)
				BNC×2, loop-through, 75		on/off
Reference	input:			Analog composite		on/off
				BNC×2, loop-through, 75

Serial digital component input Complies with SMPTE259M-C standard,

(option): BNC×2, active through

(Video	output connector)
Analog	component	output:	BNC×3 (Y, PB, PR)
			Y: 1.0 Vp-p, 75
			PB, PR: 0.486/0.7 Vp-p switchable, 75
Analog	composite	output:	(75% color bar, 7.5% setup)
			BNCx3
			Video1/video2/video3 (superimpose
Serial digital component output			on/off)
(option):			Complies with SMPTE259M-C standard,
			BNC×3

(Video signals			adjustment)
Composite video			input signal:	±3 dB
Video	output	gain:		±3 dB
Video	output	chroma gain:		±3 dB
Video	output	hue:		±30°
Video	output	setup:		±15	IRE
Video output sync phase:				±8	s
Video output SC phase:				±180°
Video output Y/C delay:				±300	ns

AUDIO

(Digital audio)

Sampling frequencies:	48 kHz
Quantizing:	16 bits
Frequency response:	20 Hz to 20 kHz ±1 dB
Dynamic range:	Better than 90 dB (1 kHz, emphasis OFF,
Distortion:	“A” weighted)
	Less than 0.05% (1 kHz, emphasis OFF,
Crosstalk:	standard level)
	Less than –80 dB (1 kHz, between
Wow & flutter:	2 channels)
	Below measurable limit
Headroom:	20 dB
Emphasis:	T1=50 s/T2=15 s (on/off selectable)

(Cue track)

Frequency response: 300 Hz to 6 kHz ±3 dB

(Audio input connector)
Analog	input	(CH1/CH2):	XLR×2, 600	/high impedance selectable,
Digital	input	(CH1/CH2):	+4/0/–20 dBu
			XLR×1, AES/EBU format
Serial digital		input (option):	Complies with SMPTE259M-C, 272M
Cue track input:			standard (BNC)
			XLR×1, 600	/high impedance selectable,
			+4/0/–20/–60 dBu

(Audio		output connector)
Analog		output	(CH1/CH2):	XLR×2, low impedance, +4/0/–20 dBu
Digital	output		(CH1/CH2):	XLR×1, AES/EBU format
Serial	digital output (option):			Complies with SMPTE259M-C, 272M
Cue track output:				standard (BNC)
				XLR×1, low impedance, +4/0/–20 dBu
Monitor		output:		XLR×2, low impedance, +4/0/–20 dBu
Headphones:				Variable level, mini-jack, 8

Other input/output connector

Time code input:		XLR×1, 0.5 to 8 Vp-p
Time code output:		XLR×1, 2.0 Vp-p
RS-422A	input/output:	D-sub 9-pin, RS-422A interface
RS-422A	output:	D-sub 9-pin, RS-422A interface
RS-232C:	input/output:	D-sub 25-pin, RS-232C interface
Parallel		D-sub 25-pin
Encoder	remote:	D-sug 15-pin

Weight and dimensions when shown are approximately.

Specifications are subject to change without notice.

- 7 0 -