Automatic editing
Entering the edit points
Search for the edit IN point by performing the jog or shuttle operation.
Establish the still picture mode at the desired position.
Refer to page 28 for details on the jog/shuttle operations.
Press the IN and SET buttons together.
The edit IN point is now entered.
The edit IN point value now appears on the display.
Search for the edit OUT point by performing the jog or shuttle operation.
Establish the still picture mode at the desired position.
Refer to page 28 for details on the jog/shuttle operations.
Press the OUT and SET buttons together.
The edit OUT point is now entered.
The edit OUT point value now appears on the display.
2, 4 | 1, 3 |
Match frame processing function
When using two VTRs for editing, a total of four edit points— namely, the player’s IN and OUT points and the recorder’s IN and OUT points— need to be entered. However, since the last edit point is calculated automatically, only three of these edit points must be entered.
Negative duration function
This function is used by combining setting menu No. 301 (IN/OUT DEL) and NO. 302 (NEGA FLASH) described on page 49.
- 34 -
