Checking the edit points

Press the IN (or OUT) button to check the edit point.

The value of the entered edit point appears on the display.

Press the IN (or OUT) button while holding down the PREROLL button to check the image at the edit point.

The tape is accessed at the edit IN (or OUT) point, and the still picture mode at that point is displayed.

Press the IN and OUT buttons together to check the edit duration.

The duration time appears on the display.

Calculating the duration

When both edit points have been set, the duration between the two edit points.

When only one edit point has been set, the duration between the set data and the current tape address.

When neither edit point has been set, the duration of the previously edited interval.

2 1, 3

- 3 5 -

Page 35
Image 35
Panasonic AJ-D750P manual Checking the edit points, Calculating the duration