USER menu
<AUDIO> (continued)
Item
No. Superimposed display
716 REC CUE
717SCALE DISP
718DV OUTPUT
719 PB FADE
720EMBEDDED AUD
| Setting | Description |
No. | Superimposed | |
| display |
|
0000 | CUE This selects the input signal recorded in CUE. | |
0001 | CH1 | 0: CUE IN |
0002 | CH2 | 1: Audio CH1 input |
0003 | CH1+2 | 2: Audio CH2 input |
|
| 3: Audio CH1 and CH2 MIX signal |
0000 | FULL This selects the level meter scale. | |
0001 | FINE | 0: Full scale. |
|
| 1: Fine scale. |
0000 | ST1 This selects the AUDIO CH1 and CH2 output signals during | |
0001 | ST2 | DV format playback. |
0002 | ST1+2 | 0: The CH1 track signals are output to CH1 and the CH2 |
|
| track signals to CH2. |
|
| 1: The CH3 track signals are output to CH1 and the CH4 |
|
| track signals to CH2. |
|
| 2: The mixed CH1 and CH3 track signals are output to CH1 |
|
| and the mixed CH2 and CH4 track signals to CH2. |
|
| <Note> |
|
| This item setting is valid only when the tape recorded on the |
|
| four channels of the DV format is played back. |
0000 | AUTO | This selects the processing method for the audio edit points |
0001 | CUT | (IN point, OUT point) during playback. |
0002 | FADE | 0: According to the status during recording. |
|
| 1: Forced CUT |
0000 | OFF | 2: Forced FADE |
This selects whether to superimpose the audio data onto the | ||
0001 | ON | serial output. |
|
| 0: Data is not superimposed. |
1: Data is superimposed.
<Note>
This item is valid when the optional serial interface board has been installed.
The underline on the setting item denotes the initial setting.
- 5 7 -
