Panasonic AJ-D750P manual User menu Video, Cam

Setup menus

USER menu <VIDEO>

	Item
No.	Superimposed
	display
600	PB / PR
	IN LV
601	INT BB
	SIG
602	INPUT
	C KILL
603	OUT
	VSYNC
604	V-MUTE
	SEL
605	CC	(F1)
	BLANK
606	CC	(F2)
	BLANK
607	CF ID
	SEL
608	FREEZE
	SEL
609	IN	FRM
	DET
610	OUT C
	KILL
611	EDH

Setting

No.	Superimposed		Description
	display
0000	MII This selects the component input signal level.
0001	B-CAM	0: Mll level.
		1:	cam level.
0000	OFF This selects whether to generate the internal black burst
0001	BB	signal.
		0: Signal is not generated.
		1: Signal is generated.
0000	B/W This selects color killer processing for the video input signals.
0001	AUTO	0: The signals are forcibly processed as B/W signals.
		1: The signals are automatically processed.
0000	N-VFThis selects whether to float the vertical sync position of the
0001	VF	video output in order to align the video output phase with the
		input in the EE/record/edit modes.
		0: Signals are not floated.
0000	N-MUTE	1: Signals are floated.
		This selects whether the video output signals are to be muted
0001	LOW RF	when the LOW RF or servo lock release condition occurs
		during playback.
		0: No muting. (Freeze)
0000		1: Muting. (Set to gray.)
	BLANK This selects ON or OFF for the closed capture signal in the
0001	THRU	first field.
		0: Forced blanking performed.
0000	BLANK	1: Blanking not performed.
		This selects ON or OFF for the closed capture signal in the
0001	THRU	second field.
		0: Forced blanking performed.
0000		1: Blanking not performed.
	OFF This selects whether to disable the CF ID in the component
0001	ON and SIG PB OUT.
0002	AUTO	0: ID is not added.
		1: ID is forcibly added.
0000	FIELD	2: ID is added when the CF lamp is lighted.
		This selects the freeze mode for still pictures.
0001	FRAME	0: Field freeze.
		1: Frame freeze.
		<Note>
		When frame freeze has been selected, the frame slow status
		is established with the slow setting.
0000	FORCED	This selects the conditions under which frame detection is to
0001	AUTO	be performed when signals are input.
		0: Frame detection is performed at all times.
		1: Frame detection is prohibited only when non-standard
0000	B/W		signals are input.
		This selects chroma color killer processing for the video
0001	COLOR	output signals.
		0: The signals are forcibly processed as B/W signals.
0000	OFF	1: The signals are automatically processed.
		This selects whether to superimpose EDH onto the serial
0001	ON	output signals.

0: EDH is not superimposed.

1: EDH is superimposed.

This is not displayed when the optional serial interface board has not been installed.

The underline on the setting item denotes the initial setting.

- 54 -