Saba 31-5023 manual Setting Pr/Pb/Y mode

Special functions

Setting the audio mode for karaoke music

When playing karaoke or similarly formatted DVD discs, it is possible to select vocal audio, or either right or left channel depending on the disc.

Press the AUDIO button repeatedly during playback to switch the audio output mode as follows: AUDIO 1 Ö

AUDIO 2 Ö AUDIO 1 VOCAL Ö AUDIO 2 VOCAL.

When playing karaoke or similarly formatted VCD discs, it is possible to select stereo, or either right or level channel mono depending on the disc.

Press AUDIO button repeatedly during playback to switch to the audio output mode as follows: LEFT VOCAL

ÖRIGHT VOCAL Ö MONO LEFT Ö MONO RGHT Ö STEREO.

When playing karaoke or similarly formatted CD discs, it is possible to select stereo, or either right or level channel mono depending on disc.

Press the AUDIO button repeatedly during playback to switch to the audio output mode as follows: MONO LEFT

ÖMONO RIGHT Ö STEREO.

NOTE: This system does not support CD-G formatted discs.

Selecting the output signal (Progressive/Interlaced) Some televisions or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs to 480p progressive-scan components allows you to view the highest quality pictures with high resolution.

NOTE: Your television or monitor must also be set to the 480p mode.

Setting the progressive-scan mode:

1.connect the COMPONENT VIDEO OUT Pr/Pb/Y jack on the DVD player to the according video in jack of the progress-scan TV.

2.Press the SOURCE button to select DVD mode.

3.Press the OPEN/CLOSE button to open the DVD door.

4.Press STOP button five times, to select Progressive Scan ON or OFF.

Note: P-SCAN will appear on the display, when you turn it on.

Setting Pr/Pb/Y mode:

Using the setup menu (Press the SETUP button on the remote control), select the video output menu from general setup. Select the PrPbY mode.

27