Estate TUD4700 manual Canceling a Cycle, Changing a Cycle or Setting, Adding Items During a Cycle

		Use this cycle for loads					Use both
		with heavy food soil.					detergent
							dispenser
							sections.
Pre-	Rinse		Rinse	Main	Rinse	Final	Dry	Time	Water
Wash				Wash		Rinse		(min)	Usage
									(gal/L)
●			●	●	●	●	●	90	7.2/27.2
		Use this cycle for loads					Use both
		with normal amounts of					detergent
		food soil. (The energy-					dispenser
		usage label is based on					sections.
		this cycle.)
Pre-	Rinse		Rinse	Main	Rinse	Final	Dry	Time	Water
Wash				Wash		Rinse		(min)	Usage
									(gal/L)
			●	●	●	●	●	85	5.7/21.8
		Use this cycle for rinsing					Do not use
		dishes, glasses, and					detergent
		silverware that will not be					with this
		washed right away.					cycle.
Pre-	Rinse		Rinse	Main	Rinse	Final	Dry	Time	Water
Wash				Wash		Rinse		(min)	Usage
									(gal/L)
					●	●		20	2.9/10.9

Canceling a Cycle

You can cancel a cycle at any time.

1.Turn the cycle control knob slowly clockwise until you hear water draining. Let the dishwasher drain completely.

2.Open the door.

3.Turn the cycle control knob to Off.

Changing a Cycle or Setting

You can change a cycle anytime during a cycle.

1.Lift the door latch to stop the cycle.

2.Turn the cycle control knob clockwise.

3.Check the detergent dispensers. They must be filled properly for the new cycle.

NOTE: Turning the cycle control knob can cause the covered detergent dispenser section to open and release the detergent. Check the covered section if the cycle uses detergent in both sections.

4.Close the door firmly until it latches. The dishwasher starts a new cycle.

Adding Items During a Cycle

You can add an item anytime before the main wash starts, or the cycle control knob reaches Normal Wash.

1.Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door.

2.Open the door and add the item.

3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. This reduces the amount of moisture escaping from the vent when restarting a cycle.

4.Close the door firmly until it latches. The dishwasher resumes the cycle.

Option Selections

You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.

No Heat Dry

Select this energy-saving option to dry without heat. No Heat drying is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.

The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.

NOTE: Rinse Only automatically uses this option. No Heat Dry is an option with all other cycles.

Hi-Temp Wash (on some models)

Select this option to add extra heat to the water in the Heavy Plus, Heavy Wash, or Normal Wash cycles. This helps remove food soil.

Delay Hours (on some models)

Select this option to run your dishwasher at a later time or during off-peak hours.

To delay the start

1.Close the door.

2.Select a wash cycle and option.

Press the desired cycle. Turn the cycle control knob clockwise to the number of hours you want the dishwasher to delay the start.

The dishwasher starts the cycle in the selected number of hours. You can add items while the time is counting down.

3.Close and latch the door. The cycle control knob will not advance if the door is unlatched.

11