6Preparation
1.Turn on both hot and cold water faucets fully. Check and be sure the water connection is tight.
2.Place the laundry in the drum.
3.Add laundry additives (e.g. detergent, fabric softener,bleach).
Starting
1.Press the “On/Off” button.
2.Select the appropriate wash cycle and temperature suitable for your items.
3.If required:
–select any auxiliary function,
–adjust the spin speed,
–set the time delay,
4.Close the loading door.
5.Press “Start/Pause/Cancel” button.
The display shows the time remaining for the program to complete if time delay is not set.
The display shows the time remaining for the program to start if the time delay is set.
6.Check if the Door Locked Symbol lights up on the screen.
The Door Locked Symbol will light up if time delay is not set.
The Door Locked Symbol will fade if time delay is set.
Canceling a program
1.Press and hold the `Start/Pause/ Cancel` button for about 3 seconds; the “Start” symbol will start flashing.
2.The washer can drain all the water or can take in water for 3 times at most to cool down the clothes and complete draining process.
Adding more laundry
•This is only possible under the following conditions:
1. during time delay,
C You may add or remove laundry during the time delay (until the program starts).
2. At the beginning of a washing cycle, C Washer allows adding more laundry during a future step only if the water
level is low enough to open the loading door or if the temperature in the washer is low
In order to add laundry after the start- up of the program:
1. Press “Start/Pause/Cancel” button.
Wait for the safety lock to open .
2.Open the loading door and put in more laundry.
3.Close the loading door.
27
EN
