Blomberg WM 87120 NBL00 installation instructions

Models: WM 87120 NBL00

1 44
Download 44 pages 9.73 Kb
Page 8
Image 8

off.

Damaged or worn power cords and plugs must only be replaced by a Blomberg Service technician.

Never use an extension cord or adapter to connect the appliance to the electrical power due to the risk of electric shock and/or fire.

All broken and faulty components, panels and parts must only be replaced with original Blomberg spare parts by a Blomberg Service technician.

Do not force the washer door open when it is locked. The door must be closed any time during the programme cycle.

Do not use fabric softeners or products to reduce static unless recommended by the manufacturers of the fabric softener product.

Check the drain pump filter occasionally to remove coins, buttons and such small objects.

Always drain off the water completely before cleaning the pump filter, before transporting the washer, when there is a danger of frost and when there is a power failure (For emergency draining, See User maintenance instructions).

Always be sure that the washer has been properly installed by licensed personnel, water and electrical connections and grounding conform to all relevant codes and requirements.

This manual does not cover every possible condition and situation that may occur. Use common sense and caution when installing, operating, and maintaining any appliance.

SAVE THESE INSTRUCTIONS

Always follow the instructions on this user guide. If you aren’t sure how to perform them, please call Customer Service for assistance and scheduling service.

8

EN

Page 8
Image 8
Blomberg WM 87120 NBL00 installation instructions