The washer will wait until there is a

 

 

sufficient amount of water, which

 

Water pressure may be low.

may lengthen the cycle time to

 

 

avoid poor washing results due to

 

 

insufficient water.

 

 

 

 

 

Cycle time is lengthened to avoid

 

Supply voltage may be low.

poor washing results when the

 

 

supply voltage is low.

 

 

 

 

 

Cycle time lengthens to heat up

 

Inlet temperature of water may

the water when the inlet water is

Cycle time takes longer

cold. Also, washing time can be

be low.

lengthened to avoid poor washing

than the time specified in

 

 

results.

the owner’s guide.

 

 

 

 

 

The automatic spin correction

 

There may be an imbalance of

system might have been activated

 

load in the drum.

due to the unbalanced distribution of

 

 

the laundry in the drum.

 

 

 

 

Number of rinse cycles might

Use a proper amount of HE

 

detergent. Reduce the amount of

 

have increased to obtain a better

 

detergent next time you operate the

 

rinse.

 

washer.

 

 

 

 

 

 

In the case of a paused

 

 

countdown while taking in water:

The washer will wait until there is a

 

Timer will not countdown until

 

sufficient amount of water to avoid

 

the washer is filled with the

 

poor washing results due to lack

 

correct amount of water. Time

 

of water. Then the timer will start to

 

will not count down until the

 

count down.

 

selected temperature for the

 

 

 

program is reached

 

 

In the case of a paused

 

 

countdown at the heating step:

 

 

Time will not count down until

 

 

the selected temperature for the

 

 

program cycle is reached.

 

It continuously washes.

 

The automatic spin correction

Remaining time does not

 

 

system might have been activated

count down.

 

 

due to the unbalanced distribution of

 

 

 

 

the laundry in the drum.

 

In the case of a paused

 

 

The laundry in the drum may be

 

countdown at the spinning step:

 

tangled up too much. Laundry

 

There may be an imbalance of

 

should be rearranged and re-spun.

 

laundry in the drum.

 

 

 

 

No spinning is performed when the

 

 

laundry is not evenly distributed in

 

 

the drum to prevent any damage to

 

 

the appliance and to its environment.

 

 

 

34

EN

Page 34
Image 34
Blomberg WM 87120 NBL00 installation instructions Washer will wait until there is a