Blomberg WM 87120 NBL00 Levelling the washer, Electrical Connection, Grounding Instructions

2.Remove the shipping bolts by turning them gently.

3.Bolt hole covers (supplied in the bag with the owner’s guide) are fitted into the holes on the rear panel with a special lock mechanism. To fit the cover, first insert it into the hole and then rotate it counterclockwise with a screwdriver until it is locked. To unlock, apply the procedure in reverse.

C Keep the shipping bolts in a safe place to reuse when the clothes washer needs to be moved again in the future.

C Never move the appliance without shipping bolts properly fixed in place!

Levelling the washer

A WARNING - Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged.

1.Manually (by hand) loosen the lock nuts on the feet.

2.Adjust them until the washer stands level and firmly.

3.Important: Tighten all lock nuts up again.

Electrical Connection

Grounding Instructions

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and a grounding plug.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70.

B WARNING – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

B WARNING – Be sure that the power cord is always accessible by the user after the appliance is installed.

B WARNING – Never use an extension cord or adapter to connect the appliance to the electrical power due to the risk of electric shock and/or fire.

It is the personal responsibility and obligation of the appliance owner to provide a proper and grounded outlet installed by a qualified electrician.

B WARNING – Never use a damaged power cord since there is a risk of electric shock and/or fire.

The damaged power cord must be replaced by a qualified electrician as soon as possible.

Electrical supply voltage must conform to the voltage specifications

(208-240V, 60Hz) located on the appliance. For this purpose, a junction box (as seen in picture below) must be obtained. Junction box is supplied with Blomberg Clothes Dryer (model no: DV

16540 NBL00) and it works as a voltage converter from 110/120V to 208/240V between the mains and appliance.

B WARNING – Only one appliance must be connected to a properly grounded individual branch circuit outlet.

B WARNING – Be sure to unplug the power cable before attempting maintenance or cleaning of your appliance to minimize the risk of

11

EN