Garmin DTC300 manual Step

RESTRICTED USE ONLY Fargo Electronics, Inc.

Resolving a Ribbon RFID Error (Ribbon RFID Antenna is Corrupted)

All Troubleshooting procedures assume that only factory-authorized supplies are in use in the Printer.

Step Procedure

1Review the following information.

•Symptom: Printer RFID Sensor does not detect a recognizable signal from the Ribbon.

•Printer Error State: The Ribbon tag information is corrupted or incorrect.

•LCD Error Display: Ribbon RFID Error

•Driver Monitor Error Display: Ribbon RFID Error

Continued on the next page

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-11