Garmin DTC300 manual Using the Resin Heat K option

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Resin Heat (K) option

Use this option to control the amount of heat the Printer uses when printing with the resin black panel(s) of a full-color Ribbon or when printing with a resin-only Ribbon by adjusting the Resin Heat slide.

Step Procedure

1Move the slide to the left to cause less heat to be used in the printing process, causing resin images to be lighter or less saturated.

OR

Move the slide to the right to cause more heat to be used.

(Note: This control can be helpful for fine-tuning the transfer of resin text and bar codes.)

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 5-27