Garmin DTC300 manual Using the Overlay Heat O option

RESTRICTED USE ONLY Fargo Electronics, Inc.

Using the Overlay Heat (O) option

Use this option to control the amount of heat the Printer uses when printing with the overlay panel of a Ribbon.

Step Procedure

1Move the slide to the left to cause less heat to be used in the printing process. (Note: Certain card types may need additional heat for better transfer of the overlay material.)

OR

Move the slide to the right to cause more heat to be used.

(Note: This control can be helpful for fine-tuning the transfer of overlay onto the card.)

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 5-31