Garmin DTC300 Encoding data is written to the card, Card is ejected from the Printer, All Stop

RESTRICTED USE ONLYFargo Electronics, Inc.

Reviewing the DTC400/DTC300/DTC300M Sequence of Operations (continued)

Step	Process
23	The Card Feed Stepper Motor engages to queue card for magnetic encoding.
24	The Encoding data is written to the card.
25	The Card Feed Stepper will re-queue card for each verification pass required.
26	After Ribbon advances a few encoder clicks, assume Ribbon free of card. All Stop.
27	Repeat steps 9 through 23 for appropriate number of color/overlay panels.
28	The Card is ejected from the Printer.
29	All Stop.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 1-6