RESTRICTED USE ONLY

Fargo Electronics, Inc.

Using the Print Left of Form Option

Use this option to adjust the vertical position of the printed image on a card so it appears centered. (Note: When adjusting this value, keep in mind that cards always remain in the same landscape orientation while moving through the Printer.)

Step Procedure

1Enter a negative value to move the image towards the bottom edge of the card (See image below),

OR

Enter a positive value to move the image towards the back top edge of the card (see image below).

Maximum Adjustment Range: The maximum adjustment range is ±127. As a rule, 10 equals about .030"/. 8mm. This is about the same as the thickness of a standard CR-80 size card.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)

5-91

Page 201
Image 201
Garmin DTC300 manual Using the Print Left of Form Option