Garmin DTC300 manual Resolving the Image Placement problems, Appears, Incorrectly

RESTRICTED USE ONLY Fargo Electronics, Inc.

Resolving the Image Placement problems

All Troubleshooting procedures assume that only factory-authorized supplies are in use in the Printer. This procedure is used to adjust the position of the card in the Print driver and does not change the internal settings of the printer. See Using the Printer Calibration Utility for instructions on changing the printers internal settings.

Step	Procedure
1	Review the following information.
	•	Symptom: Printing is cut off or is not centered on the card, or a white border
		appears.
	•	Printer Error State: None
	•	LCD Error Display: None
	•	Driver Monitor Error Display: None
2	Verify if the Image Position option within the Calibrate tab is set correctly or
	incorrectly.
	a.	Open the Printer Control Panel from the Computer.
		• If using Windows 98SE, Me, right click on the
		DTC400/DTC300/DTC300M Card Printer Icon and select Properties.
		• If using Windows 2000/XP, right click on the DTC400/DTC300/DTC300M
		Card Printer and select Printing Preferences.
	b.	Click on the Calibrate tab.
	c.	Adjust the Vertical and/or Horizontal Image Position settings based on
		where the white border is on the card.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-47