Garmin DTC300 manual Print Process Errors, Step

RESTRICTED USE ONLY Fargo Electronics, Inc.

Print Process Errors

All Troubleshooting procedures assume that only factory-authorized supplies are in use in the Printer.

Resolving a Card Not Fed Error (Cards will not feed off the Hopper)

Step Procedure

1Review the following information.

•Symptom: Cards will not feed at all.

•Printer Error State: Card is not being detected by the Card TOF Sensor 11 seconds after the initiation of a print job causing the Printer to produce an error

•LCD Error Display: Card Not Fed

•Driver Monitor Error Display: Unable to Feed Card

Continued on the next page

I

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-6