Garmin DTC300 manual VeriMarkTM Application Specifications

RESTRICTED USE ONLY Fargo Electronics, Inc.

VeriMarkTM - Application Specifications

VeriMarkTM foils will cover a dimensional area of 1.9 cm length x 1.3 cm height. The exclusive areas are as follows:

•VeriMarkTM Card customers will be able to choose 1 of 8 pre-defined placements (corners) via Printer Driver (4 positions) Landscape and (4 Positions) Portrait mode.

•VeriMarkTM foil placement will not interfere with card punch slots .

•Foil color base is silver; debossed impression is gold foil.

•VeriMarkTM foil placement will be located 0.4 cm from the edges of the card except for the top two locations on portrait orientation cards (positions E & F). The foil will be located 0.9 cm from the top of the card and 0.4 cm from the sides of the card.

HoloMarkTM and Custom HoloMarkTM - Application Specifications

HoloMarkTM and Custom HoloMarkTM foils will cover a dimensional area of 1.5 cm x 1.5 cm. The exclusive areas are as follows:

•HoloMarkTM and Custom HoloMarkTM card end-users will be able to choose 1 of 8 pre-defined placements (corners) via Printer Driver (4 positions) Landscape and (4 positions) Portrait mode.

•HoloMarkTM foil placement will not interfere with card punch slots.

•Foil Color options will be silver or gold.

•Outside edge placement of Foil impression options on card will be 0.4 cm from edge of card.

•HoloMarkTM foil placement options will be at all four corners of card located 0.4 cm from edge of card.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 2-7