RESTRICTED USE ONLYFargo Electronics, Inc.

Resolving the Image Placement problems (continued)

Step Procedure

4Verify if the Vertical Image Position Setting is set correctly or incorrectly. See the graphic below.

If the white border is on the top edge of the card, adjust the Vertical value by +2.

If the white border is on the botom edge of the card, adjust the Vertical value by -2.

a.Click on OK.

b.Run a self-test.

c.If the white border is diminished, continue the adjustment until it is gone.

Graphic B

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)

4-49

Page 106
Image 106
Garmin DTC300 manual Resolving the Image Placement problems