Garmin DTC300 manual Resolving the Image Placement problems, Graphic a

RESTRICTED USE ONLYFargo Electronics, Inc.

Resolving the Image Placement problems (continued)

Step Procedure

3Verify if the Horizontal Image Position Setting is set correctly or incorrectly. See the graphic below.

•If the white border is on the leading edge of the card, adjust the Horizontal value by +2.

•If the white border is on the trailing edge of the card, adjust the Horizontal value by -2.

a.Click on OK.

b.Run a self-test.

c.If the white border is diminished, continue the adjustment until it is gone.

Continued on the next page

Graphic A

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 4-48