Garmin manual Reviewing the DTC400/DTC300/DTC300M Boot up Sequence

RESTRICTED USE ONLY Fargo Electronics, Inc.

Reviewing the DTC400/DTC300/DTC300M Boot up Sequence

Step Process

1On Power up, the Printer checks the current state of the Card Feed Sensor and the Headlift Sensor.

2If the Headlift Sensor is found to be open, the Headlift Motor will turn until a closed state is seen.

3If the Card Feed Sensor is found to be blocked, the Card Feed Stepper will engage to eject the card.

DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1) 1-7