Snapper SLB55150BV manual Lubrication, Troubleshooting

Models: SLB55150BV

1 12
Download 12 pages 37.74 Kb
Page 9
Image 9

5 maintenance (cont.)

BEFORE MAKING ANY ADJUSTMENTS, STOP ENGINE AND DISCONNECT SPARK PLUG WIRE TO PREVENT INADVERTENT STARTING OF UNIT.

Always keep your machine clean - especially the engine. Check all adjustments periodically. Also, periodically check that all fasteners are secure.

Never make any adjustments to the unit until the engine is off and the spark plug wire is disconnected.

If carburetor adjustment is necessary, stand to one side and keep feet and hands in the clear while making adjustments.

Keep engine free of accumulations of grass, leaves or excessive grease. An accumulation of these combustible materials may result in a fire.

Store gasoline in a safe and approved container in a cool, dry place.

Keep the unit and any fuel containers in locked storage to prevent children from playing and/or tampering with them.

Do not store gasoline powered equipment or fuel containers in a basement or any closed area where heating or heat appliances or open pilot lights are present, unless the fuel is completely drained from the power equipment and the fuel containers.

LUBRICATION:

The pneumatic tires on your blower contain bearings that should be lubricated on a weekly basis using a high-performance, automotive quality grease to ensure long life and minimal wear.

TROUBLESHOOTING:

UNIT WILL NOT START:

Check fuel and oil levels.

Check to make sure choke is set when engine is cold, off when hot.

Check throttle for proper operation.

Check intake baffle for jammed debris or accumulation of debris.

If condition persists, contact dealer.

UNIT STALLS:

Check fuel and oil levels.

Check intake baffle for jammed debris or accumulation of debris.

If condition persists, contact dealer.

EXCESSIVE NOISE OR VIBRATION:

Check to make sure all fasteners are tightened securely.

Remove intake baffle and visually inspect impeller for broken, bent, or cracked blades; also make sure impeller hub is securely tightened onto engine shaft – bolt should be torqued to 15 ft/lbs. Pull recoil and check for bent engine shaft. Contact dealer for repair or replacement if necessary. Do not attempt to repair a damaged impeller or bent engine shaft. Serious injury or equipment damage may result.

BEFORE REMOVING INTAKE BAFFLE, OR ANY OTHER COMPONENT, STOP ENGINE AND DISCONNECT SPARK PLUG WIRE TO PREVENT INADVERTENT STARTING OF UNIT.

UNIT DOES NOT TRAVEL STRAIGHT:

Check tire pressure – 24 psi rear. Adjust as needed.

Check camber on front wheel, adjust as needed.

Make sure wheels are lubricated – see Lubrication.

Page 9
Image 9
Snapper SLB55150BV manual Lubrication, Troubleshooting

SLB55150BV specifications

The Snapper SLB55150BV is an advanced lawn mower designed for homeowners seeking a reliable, efficient, and easy-to-use machine. At the heart of its design is the powerful Briggs & Stratton engine, known for its durability and performance. With a 150cc engine displacement, this mower delivers ample power to tackle a variety of grass types and challenging terrain, ensuring a clean and even cut every time.

One of the standout features of the Snapper SLB55150BV is its innovative SureCut blade technology. This unique blade design allows for superior cutting performance by creating a mulching effect that finely chops grass clippings. This not only enhances the appearance of your lawn but also facilitates recycling nutrients back into the soil, promoting healthier grass growth. Homeowners can choose between bagging, mulching, or side discharge, offering versatility depending on lawn conditions.

The SLB55150BV includes a 21-inch cutting deck, which strikes a balance between maneuverability and coverage. This size is particularly beneficial for smaller to medium-sized yards, enabling efficient navigation around obstacles while reducing the time spent on mowing. The deck height can be easily adjusted using a single lever, allowing users to select from several cutting heights to achieve the desired grass length.

Equipped with a comfortable handle, the Snapper mower features an ergonomic design that reduces fatigue during extended use. The foldable handle mechanism allows for compact storage, making it convenient for those with limited storage space. Additionally, the mower’s lightweight build ensures easy transportation and handling, making it a practical choice for homeowners of all ages.

Another notable technology integrated into the SLB55150BV is the push start feature, which eliminates the hassle of traditional pull-start methods. This feature ensures a quick and reliable start-up, letting users get to work without delay. Furthermore, its low emissions engine meets environmental regulations, promoting cleaner air while maintaining high efficiency.

In summary, the Snapper SLB55150BV combines cutting-edge technology, user-friendly features, and robust performance, making it a top choice for homeowners seeking a dependable lawn care solution. Its versatile cutting options, adjustable height settings, and ease of use position it as a must-have tool for maintaining a pristine lawn.