4 unit operation (cont.)

STARTING THE ENGINE (cont.)

•Bracing unit with one hand, grasp recoil handle and pull briskly. You may have to pull several times before engine starts. (If engine fails to start within a reasonable amount of time, discontinue and check engine manual for further instructions.) Note: Do not allow recoil rope to snap back into recoil; damage to the rope or recoil could result.

•After engine starts, move throttle control down to approximately half and turn off choke.

PULL BRISKLY

TO SHUT ENGINE DOWN:

•Allow engine to idle for 2-3 minutes before shutting down.

•Set throttle control fully back to slow (turtle) position.

•If engine is not to be started for a prolonged period, turn fuel valve to closed position.

IMPORTANT NOTE: If you experience problems with your engine that cannot be satisfactorily resolved by following the instructions contained within the engine manual, contact your local engine dealer, or call the toll-free service number listed in the repair section of the engine manual. All engine service, warranty or otherwise, is required to be performed by a manufacturer-authorized service center. The equipment manufacturer is neither authorized nor responsible for any type of warranty engine service, nor is it equipped to perform any such service.

BLOWER OPERATION

DANGER! DO NOT PASS BY OR STAND ON THE AIR DISCHARGE SIDE OF ANY LEAF BLOWER WITH THE ENGINE RUNNING. HIGH VELOCITY DISCHARGE CAN EASILY TURN HARMLESS DEBRIS INTO FLYING PROJECTILES.

DANGER! NEVER INSERT ANY BODY PART OR FOREIGN OBJECT INTO ANY OPENING WHILE UNIT IS RUNNING. SERIOUS INJURY OR DEATH CAN RESULT.

GENERAL RULES TO OBSERVE BEFORE

AND DURING OPERATION:

•Inspect your unit before each and every use. Check for worn, bent or broken components, loose fasteners, low or flat tires, etc., and repair or replace prior to operation. DO NOT OPERATE A MACHINE THAT IS

WORN OR DAMAGED – SERIOUS INJURY OR DEATH CAN RESULT.

•Clear the entire work area of all debris that could cause damage to or become entangled in the unit. Rocks and large branches can wedge themselves between the impeller and housing, causing equipment damage or personal injury. If in doubt, remove it.

Page 6 Page 8
Page 7
Image 7
Snapper SLB55150BV manual Blower Operation, To Shut Engine Down, General Rules to Observe Before During Operation
Page 6 Page 8

SLB55150BV specifications

The Snapper SLB55150BV is an advanced lawn mower designed for homeowners seeking a reliable, efficient, and easy-to-use machine. At the heart of its design is the powerful Briggs & Stratton engine, known for its durability and performance. With a 150cc engine displacement, this mower delivers ample power to tackle a variety of grass types and challenging terrain, ensuring a clean and even cut every time.

One of the standout features of the Snapper SLB55150BV is its innovative SureCut blade technology. This unique blade design allows for superior cutting performance by creating a mulching effect that finely chops grass clippings. This not only enhances the appearance of your lawn but also facilitates recycling nutrients back into the soil, promoting healthier grass growth. Homeowners can choose between bagging, mulching, or side discharge, offering versatility depending on lawn conditions.

The SLB55150BV includes a 21-inch cutting deck, which strikes a balance between maneuverability and coverage. This size is particularly beneficial for smaller to medium-sized yards, enabling efficient navigation around obstacles while reducing the time spent on mowing. The deck height can be easily adjusted using a single lever, allowing users to select from several cutting heights to achieve the desired grass length.

Equipped with a comfortable handle, the Snapper mower features an ergonomic design that reduces fatigue during extended use. The foldable handle mechanism allows for compact storage, making it convenient for those with limited storage space. Additionally, the mower’s lightweight build ensures easy transportation and handling, making it a practical choice for homeowners of all ages.

Another notable technology integrated into the SLB55150BV is the push start feature, which eliminates the hassle of traditional pull-start methods. This feature ensures a quick and reliable start-up, letting users get to work without delay. Furthermore, its low emissions engine meets environmental regulations, promoting cleaner air while maintaining high efficiency.

In summary, the Snapper SLB55150BV combines cutting-edge technology, user-friendly features, and robust performance, making it a top choice for homeowners seeking a dependable lawn care solution. Its versatile cutting options, adjustable height settings, and ease of use position it as a must-have tool for maintaining a pristine lawn.
Top Page Image Contents