Whirlpool CEM2750TQ, CGM2751TQ warranty Commercial Dryer Specifications, Dryer Front View

COMMERCIAL DRYER SPECIFICATIONS

DRYER SPECIFICATIONS
MODEL NUMBER	CEM2750TQ††	CGM2751TQ†
GENERAL INFORMATION	Metercase Model	Metercase Model
Stainless-Look Push Button Console, white	Factory Installed	Factory Installed
enamel drum, porcelain finish top, powdered	Coin Slide	Coin Slide
paint cabinet, front panel lock blank factory	and Coin Box,	and Coin Box,
installed, removable indoor lint filter,	$0 – 2 per Cycle,	$0 – 2 per Cycle,
improved meter case. 4-way venting	$1.00 Factory Preset	$1.00 Factory Preset
ELECTRICAL REQUIREMENTS	3-Wire Nominal 240/	Nominal, 120-Volt, 60Hz
	208-Volt, 60 Hz, A.C.
		A.C., Standard 15 Amps
	Standard 30 Amps
		Breaker/Fuse Branch
	Breaker/Fuse Branch
		Circuit per Dryer
	Circuit per Dryer (Subject
		(Subject to Local Codes)
	to Local Codes)
MOTOR	1⁄3 HP Single Speed	1⁄3 HP Single Speed
	Motor with Built-In	Motor with Built-In
	Overload Protector	Overload Protector
	5.9 Amps Max Rating	5.9 Amps Max Rating
HEATER TYPE	ELECTRIC	GAS**
HEATER/BURNER RATING	Heater Rated	22,000 BTUh
(Add 500 Watts Approx. for Motor on all
	at 5600 Watts	Natural Gas
Dryer Models)
OPERATIONAL AMPERAGE	Motor — 4.0 Amps No	Motor — 4.0 Amps
(Does not Include Control or Gas Valve)	load Heater 23.33 Amps
		No load
	at 240 Volt 27.33 Total
DIMENSIONS	43" H*, 27" W, 28.5" D	43" H*, 27" W, 28.5" D
See Illustration Below
SHIPPING WEIGHT (EST.)	134 Lbs.	135 Lbs.
DRUM VOLUME	7.4 Cu. Ft.	7.4 Cu. Ft.

*Height at meter case top. **Burner orifices are available for manufactured, natural, mixed, and LP gas with varying BTU ratings. † LP conversion Kit: 49572. ††Power cords on electric models sold separately.

Energy information is available online at www.whirlpoolcommerciallaundry.com/products.

Exhaust Information

All dryers require the equivalent of a 4-inch diameter exhaust duct. Rigid metal duct is recommended. Failure to properly exhaust the dryer will result in improper operation.

27" & 29" Dryer Venting Requirements

# of 90° turns 4" Hood 2 1⁄2" Hood

Maximum length of 4" diameter rigid metal duct

0	64	Ft.	58	Ft.
1	54	Ft.	48	Ft.
2	44	Ft.	38	Ft.
3	35	Ft.	29	Ft.
4	27	Ft.	21	Ft.

Maximum length of 4" diameter flexible metal duct

0	36	Ft.	28	Ft.
1	31	Ft.	23	Ft.
2	27	Ft.	19	Ft.
3	25	Ft.	17	Ft.
4	23	Ft.	15	Ft.

Dimensions are for planning purposes only. For complete information, see installation instructions packed with product.

DRYER FRONT VIEW DRYER BACK VIEW

To locate a distributor near you, please visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS CWLL119