NEC PowerMate CT manual Multi-Sector Transfers Disabled, 2, 4, 8, 16 sectors

	Main Menu Items
Menu Item	Settings (default is bold)
Multi-Sector Transfers	Disabled, 2, 4, 8, 16 sectors
	Determines the number of sectors per block for multi-sector
	transfers.
	When Type is Auto, value in Multi-Sector Transfers field is
	auto-detected and field is read only.
LBA Mode Control	Enabled, Disabled
	When Enabled is selected, it causes logical block
	addressing to be used in place of cylinders, heads, and
	sectors.
	When Type is set to Auto, the value in the LBA Mode field
	is auto-detected and the field is read only.
32-Bit I/O	Disabled, Enabled
	When Enabled, allows 32 bit data transfers.
Transfer Mode	Standard, Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4,
	Fast PIO3/DMA1, Fast PIO4/DMA2
	Selects the method for moving data to and from the drive.
	When Type is set to Auto, the value in the field is auto-
	detected and the field is read only.
Ultra DMA Mode	Disabled, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4
	Selects the Ultra DMA Mode for moving data to and from
	the drive. Autotype the drive to select the optimum transfer
	mode.
	When Type is set to Auto, the value in the field is auto-
	detected and the field is read only.
SMART Monitoring	Enabled, Disabled
	IDE Failure Prediction
	When Type is set to Auto, the value in the field is auto-
	detected and the field is read only.
Keyboard Features	Press Enter to check or change keyboard parameters.
Numlock	Auto, On, Off
	Selects the power-on state for Numlock.
Key Click	Disabled, Enabled
	Enables or disables key click.
Keyboard auto-repeat rate	30/sec, 26.7/sec, 21.8/sec, 18.5/sec, 13.3/sec, 10/sec,
	6/sec, 2/sec
	Selects key repeat rate.

2-12 System Configuration