NEC PowerMate CT manual List of Figures

List of Figures
PowerMate CT Minitower Front Features	1-4
PowerMate CT Desktop Front Features	1-4
PowerMate CT Minitower Rear Features	1-6
Minitower Rear Connector Locations	1-6
PowerMate CT Desktop Rear Features	1-7
Desktop Rear Connector Locations	1-7
Inside the System	1-8
System Board Jumper Block Locations	2-5
Setup Main Menu	2-8
Locating the Cover Screws	3-3
Removing the Cover	3-4
Replacing the Cover	3-4
Removing the Front Panel	3-5
Replacing the Front Panel	3-6
Locating Expansion Board Slots and Connectors	3-7
Removing the Expansion Board Retainer Bar	3-7
Removing an Expansion Board	3-8
Installing a Slot Cover	3-9
Installing an Expansion Board	3-10
Replacing the Retainer Bar	3-11
Locating the RIMM and Processor Sockets	3-12
Removing a Continuity Module	3-13
Removing a RIMM Module	3-13
Installing a RIMM Module	3-15
Installing a Continuity Module	3-15
Removing the Fan, Heat Sink, and Processor	3-17
Removing a 5 1/4-Inch Device Bay Cover	3-19
Replacing a Bay Cover	3-20
Storing an Unused Rail	3-21
Locating the Screws for 5 1/4-Inch Device Rails	3-21
Releasing a 5 1/4-Inch Device	3-22
Inserting a 5 1/4-Inch Device for Use in a Minitower	3-23
Removing the 3 1/2-Inch Accessible Device Bracket	3-24
The 3 1/2-Inch Accessible Device Bracket	3-25
Locating the Internal Drive Bracket	3-26
Locating Internal Drive Bracket Screws	3-27
Sliding the Internal Drive Bracket out of the Chassis	3-27
Locating Internal Drive Screws on the Bracket	3-28
Locating Guides for the Internal Drive Bracket	3-29
Securing the Internal Drive Bracket	3-29
Locating the Battery on the System Board	3-30
Removing the Battery	3-31
Locating System Board Screws	3-32
Locating the Power Supply Screws	3-33
Locating Front USB Port Screws	3-34
Releasing the Front LED/Switch Bracket	3-35
Removing the Front LED/Switch Bracket	3-35
Removing the Chassis Intrusion Switch	3-36
Accessible Device Placement for a Desktop	3-38
Accessible Device Placement for a Minitower	3-39
Minitower External Cable Connector Locations	4-2
Desktop External Cable Connector Locations	4-3
System Board Internal Cable Connectors	4-3
System Board Jumper Locations	4-4
System Board Upgrade Sockets	4-5
PowerMate CT System Illustrated Parts Breakdown	5-4
Locating the Mouse Ball Cover	6-3

Contents vii