NEC PowerMate CT manual Boot Menu Settings, Exit Menu Items, Press Shift +

Boot Menu

Choose the Boot Menu by selecting Boot in the legend bar on the Main Menu screen. Other Boot Menu options are available by selecting submenus.

Use the arrow keys to select one of the Boot Menu options and press Enter to select a submenu. Items with grayed-out text are not available. Explanations of each Boot Menu item are in the following table.

	Boot Menu Settings
Menu Item	Settings (default is bold)
+Removable Devices	Sets the bootable device order.
+Hard Drives
ATAPI CD-ROM Drive	Use the up or down arrow to select a device, then press
Network Boot	the + or – key to move the device up or down the list.
	Devices with a + in front of the device name can be
	expanded by pressing Enter. This shows a list of the
	devices.
	To enable or disable a device, select the device and
	press Shift + 1.
	To move a device between Removable Devices and
	Hard Drives, select the device and press the n key.
	To remove a device that is not installed, select the
	device and press the d key.

Exit Menu

Choose the Exit Menu by selecting Exit in the legend bar on the Main Menu screen. Other Exit Menu options are available by selecting submenus.

Use the arrow keys to select one of the Exit Menu options and press Enter to select a submenu. Explanations of each Exit Menu item are in the following table.

	Exit Menu Items
Menu Item	Settings (default is bold)
Exit Saving Changes	Implements the changes just made, and exits BIOS.
Exit Discarding Changes	Exit leaving BIOS unchanged.
Load Setup Defaults	Loads default values for all BIOS setup fields.
Discard Changes	Load previous values from BIOS for all setup fields.
Save Changes	Saves all setup value changes to BIOS.

2-22 System Configuration