NEC PowerMate CT manual Cd-Rom

	Main Menu Items
Menu Item	Settings (default is bold)
Primary IDE Master	10263 MB
Primary IDE Slave	None
Secondary IDE Master	CD-ROM
Secondary IDE Slave	None
	Note: The following setting information applies to the
	primary and secondary master and slave devices.
	Each device menu item displays the hard drive or CD-ROM
	identifier if a device is installed.
	If you install a hard drive that does not feature auto IDE
	type detection or your IDE hard drive was formatted on
	another system with parameters different from those
	reported by the drive, enter a parameter for each of the
	fields in the device submenu.
	Bring up a device submenu by pressing Enter. Each
	submenu and its fields are described next.
Type	User, Auto, None, CD-ROM, IDE/ATAPI Removable
	When set to Auto, the values for Cylinders, Heads,
	Sectors, Multi-Sector Transfer, LBA Mode Control, Transfer
	Mode, and Ultra DMA Mode are displayed but are read
	only.
	When set to Auto, the BIOS detects what the drive is
	capable of, not the translation mechanism that was used to
	format the drive. If a drive is run in a mode other than the
	mode in which it was partitioned and formatted,
	unpredictable results might occur, including data loss.
	When set to None, informs the system to ignore this drive.
	When set to CD-ROM or IDE/ATAPI Removable, allows
	the manual entry of all fields described next.
	When set to User, allows the manual entry of all fields
	described next.
Cylinders	When Type is Auto, value in the Cylinders field is auto-
	detected and field is read only.
Heads	When Type is Auto, value in Heads field is auto-detected
	and field is read only.
Sectors	When Type is Auto, value in Sectors field is auto-detected
	and field is read only.
Maximum Capacity	8455 MB
Total Sectors	20044080 total sectors
Maximum Capacity	10263 MB

System Configuration 2-11