NEC PowerMate CT manual Security Menu Items, Agp, Pci, Clear , Set

	Advanced Menu
Menu Item	Settings (default is bold)
Event Logging	Enabled, Disabled
	Selecting Enabled permits logging of DMI events.
ECC Event Logging	Enabled, Disabled
	Select Enabled to allow logging of ECC events.
Mark DMI Events As Read	Press Enter. Select Yes or No to “Mark all Events as read?”
Preboot Management	Disabled, Enabled
	Select Enabled to enable the Preboot Management function.
Default Primary Video Adapter	AGP, PCI
	Select PCI to have a PCI card, if installed, used for the boot
	display device.
	Select AGP to have the AGP card, if installed, used for the
	boot display device.
Hardware Monitor Control	The BIOS detects the value for each of these categories
System Temperature	automatically and monitors them accordingly.
CPU Temperature
CPU Fan Speed
Power Fan Speed
System Fan Speed
Vcore Voltage
Vtt 1.5 Voltage
+3.3V Voltage
+5.0V Voltage
+12V Voltage
+5 Usb Voltage
Battery Voltage

Security Menu

Choose the Security Menu by selecting Security in the legend bar on the Main Menu screen. Other Security Menu options are available by selecting submenus.

Use the arrow keys to select one of the Security Menu options and press Enter to select a submenu. Items with grayed-out text are not available. Explanations of each Security Menu item are in the following table.

	Security Menu Items
Menu Item	Settings (default is bold)
Supervisor Password Is	Clear, Set
	Status only, user cannot modify. Supervisor password
	controls access to the BIOS Setup Utility.
User Password Is	Clear, Set
	Status only, user cannot modify. User password controls
	access to the system at boot.

2-18 System Configuration